EMAK BCH 500 Manual De Uso Y Mantenimiento página 40

EN
WARNING
When working with the machine, always use approved protective clothing. Clothing must
be suitable and not hinder the operator in any way. Wear close-fitting protective clothing.
Protective dungarees and a jacket are ideal. Do not wear clothes, scarves, ties or jewellery that
could become entangled in the undergrowth. Ensure that long hair is tied back and protected.
WARNING
The use of hearing protection requires greater attention and prudence, because the
perception of acoustic danger signals (screams, alarms, etc.) is limited.
NOTE
Ask your trusted dealer for advice regarding the appropriate clothing to be used.
2.5 SAFETY WARNINGS AND SYMBOLS
Fig. 22 shows the symbols and safety warnings on the machine:
1. Read the use and maintenance manual before using this machine.
2. Wear eye protection, ear defenders and a safety helmet.
3. Wear safety shoes.
4. Wear protective gloves when using metal or plastic discs.
5. Pay careful attention to the projection of objects.
6. Keep any persons at a distance of 15 m.
7. Risk of hot surfaces.
8. Pay special attention to the risk of counter-knocks. They can be dangerous.
9. Priming bulb.
3 MAIN COMPONENTS
Fig. 1 shows the main components of the machine:
1./2. Equipment supplied
3. Harness
4. Bevel gear
5. Safety guard
6. Strimmer head
7. Fuel tank plug
8. Priming bulb
9. Carburettor adjusting screw
10. Muffler guard
11. Spark plug casing
12. Air filter housing
4 CE NAMEPLATE
Fig. 22 shows an example of a CE identification nameplate:
10. Machine type: BRUSHCUTTER.
11. Guaranteed sound power level.
12. CE marking of conformity.
13. Serial number.
34
13. Starter grip
14. Starter lever
15. Accelerator stop lever
16. STOP button
17. Accelerator lever
18. Harness connection
19. Grip
20. Transmission pipe
21. Semi-acceleration button
22. Spark plug casing screw
14. Year of production.
15. Maximum output shaft speed (rpm).