!
This equipment has not been designed to be
installed in a potentially explosive atmosphere.
Replacement of the power cord must be
performed by qualified personnel.
,
Specific adhesives highlight the presence of
mains voltage in the proximity of areas (however
protected) with risks of an electrical nature.
!
Before connection, ensure that the means
GB
for disconnecting the equipment from the mains
are incorporated into the fixed installation in
accordance with the installation rules (required for
equipment
connected to a permanent installation).
!
During the installation of the equipment, it is
not allowed the transit or the permanence of
people not involved in the installation near the
working area; use individual protection devices
(gloves, safety shoes, etc.) and operate in
compliance with the rules related to the safety at
work.
!
In the design and construction phase, the
manufacturer has paid particular attention to the
aspects that can cause risks to safety and health
of persons that interact with the equipment.
Carefully read the instructions in the manual
provided and those applied directly, especially
those concerning safety.
!
Do not tamper with, evade, eliminate or by-
pass the installed safety devices. Failure to
comply with this requisite can lead to serious risks
for personal health and safety.
It is recommended to simulate some test
manoeuvres to identify the controls, in particular
those relative to switch-on and switch-off and their
main functions.
The appliance is only destined for the use
for which it has been designed; any other use
must be considered improper.
ENGLISH
supplied
without
a
plug
!
The manufacturer declines all liability for any
damage to objects or injury to persons owing to
improper or incorrect use.
!
All maintenance interventions that require
precise technical skill or particular ability must be
performed exclusively by qualified staff.
!
When using the appliance, never obstruct
the air inlet of the condensing unit when the
appliance is on, so as not to compromise its
performance and safety.
to
be
!
Never stretch the power cable.
In order to guarantee hygiene and protect
the foodstuffs from contamination, the elements
that come into direct or indirect contact with the
foodstuffs must be cleaned very well along with
the surrounding areas. These operations must
only be performed using detergents that can be
used
with
products or those that contain substances that are
harmful to personal health.
In the case of prolonged inactivity, as well
as disconnecting all the supply lines, it is
necessary to accurately clean all internal and
external parts of the appliance.
4
foodstuffs,
avoiding
inflammable