Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the fuses
The fuses are in the lower part of the
technical compartment (E). To access these, open
8.4.
Maintenance intervals
In order to assure constant efficiency of the equipment, it is advisable to inspect the equipment at intervals
GB
indicated in the following table:
Operation
Routine cleaning
Mechanical
protections
Control
Machine structure
Safety signs
Electrical panel
Connecting cable,
socket and plug
General equipment
inspection
ENGLISH
General cleaning of equipment and surrounding work area
Inspection of the state of preservation of the external mechanical
parts;
check for any deformation, loosening or removal
Check of the mechanical part;
check for cracks or deformations;
check for tightness of screws;
check
of
the
danger/information symbols.
Check tightness of screws, main fasteners, etc.
Check legibility and state of preservation of signs
Checking the state of preservation of electrical components and
wiring between the switchboard and electrical components.
Check the state of preservation of components (replace if necessary)
Complete general inspection of the equipment
the control panel using the same method listed for
the access and cleaning of the condenser.
Description
state
of
preservation
26
of
the
stickers
and
Interval
daily
monthly
yearly
yearly
yearly
yearly
yearly
10 years
Publicidad
