Descargar Imprimir esta página

Eurofred 4T Manual De Instalación, Uso Y Mantenimiento página 50

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 129
If
the
product
established value within the established blast
chilling time, the cycle is considered as completed
and a preserving cycle is automatically started
and an intermittent sound confirm the correct
conclusion of the cycle.
In case the product temperature does not reach
the on parameter r5 established value, the cycle
continue: the led
an intermittent sound. To stop the alarm press a
key.
Time Blast Chilling cycle
GB
Select blast chilling cycle by pressing key
twice: LED
display shows the cycle duration. Using
keys the blast chilling time can be changed.
Hard Time Blast Chilling cycle
Select blast chilling cycle by pressing key
twice: LED
the hard cycle press the
blink.
Using
and
can be changed.
Start the cycle by pressing:
and
ENGLISH
temperature
reaches
will blink accompanied by
1
and
will blink. The
1
2
and
will blink. To select
key: LED
keys the blast chilling time
. LED
are permanently on.
the
As soon as product temperature is lower than the
established value the blast chilling cycle is
considered as completed and a preserving cycle
is automatically started.
During preservation the display shows the
temperature detected by the chamber probe; LED
is switched on.
Press
2
Start the cycle by pressing:
are permanently on.
At the end of the set time, the blast chilling cycle
is concluded and the preserving cycle is
automatically started. During preservation the
display shows the temperature detected by the
chamber probe, LED
Press
and
The working set point of the hard phase is
3
established on parameter r9. At the end of the on
parameter r14 set time, the hard phase is
considered as concluded.
At the end of the set time, the blast chilling cycle
is concluded and the preserving cycle is
automatically started. During preservation the
display shows the temperature detected by the
chamber probe, LED
Press
will
,
16
to conclude the preservation cycle.
. LED
is switched on.
to conclude the preservation cycle.
is switched on.
to conclude the preservation cycle.
and

Publicidad

loading

Productos relacionados para Eurofred 4T

Este manual también es adecuado para:

5t