Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
SEAT INSTALLATION (continued)
(one on each side)
Fig. 4
© BRUNO INDEPENDENT LIVING AIDS, INC.®
6.
Rotate seat to gain access to Allen head
screw hole above seat support bracket
(Fig. 3).
7.
Insert and tighten Allen head screw.
8.
While pulling seat back slightly forward,
fully tighten M-10 seat support bracket bolt
from Step 1.
Fig. 3
9.
Tighten bolts inserted in Step 4.
Mount footrest cover.
10.
• remove cutout for footrest lever (Fig. 4);
• remove two (2) footrest bumpers (Fig. 5);
• place lower footrest cover against bracket;
• reinsert bumpers.
Fig. 5
11.
Loosen (but do not remove) two (2) top
10mm footrest top shroud nuts (Fig. 6).
12.
Slide top footrest cover under nuts
loosened in Step 10.
13.
Tighten two (2) top nuts.
Fig. 6
28
SRE-2010 INSTALLATION 02-08-2019
Publicidad
