Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
CUSTOMER EDUCATION
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
© BRUNO INDEPENDENT LIVING AIDS, INC.®
1. Inform customer of location of Operator's
Manual. Encourage them to become famil-
iar with the contents.
2. Mount Remote Transmitter with
OPTIONAL TMR-00005 kit:
• Discuss bracket location with customer
before mounting to wall.
• Position bracket on wall. Mark top and
bottom bracket holes (Fig. 1).
• Drill a pilot hole slightly smaller than
anchors provided.
• Gently pound anchors into wall with rubber
mallet.
• Position bracket on wall so top/bottom
bracket holes align with anchors (Fig. 2).
• Secure bracket to wall using screws
provided (Fig. 3).
• Slide transmitter into bracket (Fig. 4).
• Optional: Install additional screw provided
to prevent removal of transmitter from
bracket (Fig. 5).
3. Test remote transmitters.
• Use rocker switch on seat armrest to run
unit up and down the rail.
NOTE: Unit should travel noticeably
faster going up than down.
• Check for smooth operation and travel.
• Use remote transmitter to run unit up
and down rail.
• Repeat Step 3 with second transmitter.
• Check for smooth operation and travel.
32
SRE-2010 INSTALLATION 02-08-2019
Publicidad
