Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRICAL
SINGLE-USER VS. MULTI-USER DIAGNOSTIC MODE
NOTICE:
Before touching anything inside carriage
assembly, ground yourself by touching an unpaint-
ed metal surface on unit such as an exposed bolt,
or one of the mounting screws on electrical panel.
While working, periodically touch an unpainted
metal surface to dissipate any static electricity that
could harm internal components.
dip
switch
© BRUNO INDEPENDENT LIVING AIDS, INC.®
NOTES: Units ship in multi-user mode.
Changing Multi-User to Single-User Mode
1. Turn circuit breaker OFF.
2. Fold up seat. Remove screws securing seat
3. Changes are made via the #1 and #2 positions
4. Remount the seat hinge plate cover.
5. Turn circuit breaker ON, wait for 'power-up'
4 GANGED DIP SWITCH
DIAGNOSTIC MODE
Multi-User
Single-User
Quiet
Battery Warnings Only
36
Multi-user mode means that when
seat is swiveled at top of rail, unit
beeps once every three (3) seconds.
Single-user mode means that when
seat is swiveled at top of rail,
no beeps are heard.
AUDIO REFERENCE
Chirp
0.25 second
Short Beep
0.50 second
Long Beep
1.50 seconds
Pause
1.00 second
hinge plate cover to provide access to interface.
on 4-Ganged DIP Switch (see chart below).
beep.
DIP SWITCH POSITION
#1
OFF
OFF
ON
ON
SRE-2010 INSTALLATION 02-08-2019
#2
OFF
ON
OFF
ON
Publicidad
