Measured Points; Entering Points Deleting Points; Editing Points - Hilti POS 15 Manual De Instrucciones

en
13.2.1.3 Editing and deleting points
After selecting and confirming the point, it can then be edited or deleted on the following screen.
When editing a point, only its coordinates and height can be changed, not the name of the point.
In order to change its name, the point has to be reentered in the system under a different name.
NOTE
Points with attached graphics can neither be changed nor deleted. This is possible only when working on a PC with
Hilti PROFIS Layout.

13.2.2 Measured points

After selecting the applicable project, the stations and their associated measured points can be displayed.
A station and all the measured points associated with it can also be deleted.
In order to do this, the option "Measured points" should be selected when selecting the project.
13.2.2.1 Selecting the station
Station selection by way of manual entry of the station name, selection from a list or from a graphical display are
illustrated below.
84
Return to previous view.
Delete the point shown.
Edit the point shown.