Hilti POS 15 Manual De Instrucciones página 80

NOTE
The points must be measured in such a way that the lines between the measured points do not cross each other,
otherwise an incorrect area measurement will result.
After starting the application, select whether the area is in the horizontal or vertical plane.
NOTE
The station does not have to be set for this application.
NOTE
The horizontal area is calculated by projecting the measured points in the horizontal plane.
NOTE
The vertical area is calculated by projecting the measured points in the vertical plane. The vertical plane is defined by
the first two measured points.
Measurements for area calculation
The points should be measured in a sequence that encloses an area.
For the calculation, enclosure of the area is always completed by an imaginary line between the last measured point
and the first measured point.
The points must be measured in such a way that the lines between the measured points do not cross each other,
otherwise an incorrect area measurement will result.
Return to previous view.
Continue to "Select further ap-
plications".
Select the "Area measurement"
application.
en
75