Hilti POS 15 Manual De Instrucciones página 96

5. Select a clearly visible target within ± 3 degrees from horizontal at a distance of approx. 70-120 m and sight this
target carefully.
NOTE Find a suitable target that can be sighted easily and accurately.
NOTE If the tool is not in the 1st telescope position a message in the display will instruct you to bring it into this
position.
6. Take the measurement in telescope position 1.
You will then be instructed to change to telescope position 2.
7. Pivot the tool carefully into the 2nd telescope position.
Return to previous view.
Take measurement at telescope
position 1.
en
91