Measure And Record With Coordinates - Hilti POS 15 Manual De Instrucciones

11.5.3 Measure and record with coordinates

The positions of the measured points relate to the same coordinate system used for the station setup and are
described or, respectively, indicated by coordinate values E or Y, N or X and H for the heights.
en
P0 is the position of the tool after setting up.
Angles and distances to the targets are measured and the corresponding coordinates calculated and saved in memory.
Measuring points with coordinates
The following screen can be toggled between displaying angles and coordinates.
NOTE
If the option to exclude heights is activated when setting up the station, height values and all associated information
are not displayed.
72
Cancel and return to the start
menu.
Initiate measurement and save
data. The point (designation) is
increased by "1".
Measure distance.
Show coordinates.
Toggle display to angle values.
Save the horizontal distance, ho-
rizontal angle and vertical angle
values shown in the display.