Checking Points In Relation To The Axis - Hilti POS 15 Manual De Instrucciones

Rotating the axis
The axis bearing (direction) can be rotated about the starting point. If the value entered is positive, the axis is rotated
clockwise. If it is negative, the axis is rotated counterclockwise.

11.9.3 Checking points in relation to the axis

Measuring or selecting reference points
Return to previous view.
Enter axis shift manually.
Take measurement to point. The
axis, distance and height values
are shown. The values can be
individually labeled.
Rotate axis.
Continue to the next step.
Return to previous view.
Confirm rotation.
Select point from memory.
Initiate measurement to point.
Show the measured or selected
points in relation to the reference
axis.
Save measurements.
Determine new reference axis.
en
79