With Hilti Profis Layout; Data Memory; Total Station Internal Memory; Usb Memory - Hilti POS 15 Manual De Instrucciones

12.3.2 With Hilti PROFIS Layout

1. Generating points from a model consisting of lines and curves shown with graphical elements
With the PC application Hilti PROFIS Layout, dimensions from the building plan can be used to generate a graphical
layout which is a reproduction, so to speak, of the building plan.
With the aid of this application, the plan is reproduced in simplified graphical form on the PC, resulting in lines and
curves, etc. on a graphical background.
In doing so, specific curves can be created, from which points can be generated, e.g. at regular intervals.
2. Generating points from imported CAD and CAD-compatible data
With the aid of Hilti PROFIS Layout CAD data in the DXF or AutoCAD-compatible DWG format can be transferred to
a PC.
Points are then generated from the graphical data, i.e. lines, curves etc.
Hilti PROFIS Layout offers the possibility of using CAD graphics to generate point data from end points, line
intersections, mid points of line segments and points on circles, etc.
The point data generated in this way is placed visibly on the original graphics elements from CAD.
The data in a CAD format can exist in various "layers". When this data is transferred to Hilti PROFIS Layout it is merged
into a single layer.
NOTE
When organizing the data on the PC before it is transferred to the tool, special care must be taken to ensure that the
"density" of the point data is as to be expected in the final result.
3. Importing data from tables or text files
Point data can be imported into Hilti PROFIS Layout from text or XML files and then transferred to the total station.

12.4 Data memory

12.4.1 Total station internal memory

The Hilti total station saves and organizes application data correspondingly in memory.
Point or measurement data is organized in the system according to projects and stations.
Project
A single block of control points (fixed points) or layout points belongs to a project.
A number of stations may belong to a project.
Tool station plus orientation (where relevant)
A station must always have an orientation.
Measured points with unique point designations belong to a station.
NOTE
A project can be regarded as a file, so to speak.

12.4.2 USB memory

USB memory allows data to be transferred between a PC and the total station. It is not used as additional main
memory.
NOTE
The total station's internal memory is always used as its active main memory.

13 Total station data manager

13.1 Overview

The Data Manager provides access to the data stored in the total station's internal memory.
The Data Manager offers the following possibilities:
en
81