Indirect Height Measurement - Hilti POS 15 Manual De Instrucciones

After selecting the application the list of projects is displayed.
The station does not have to be set for this application.

11.8.2 Indirect height measurement

Measurements to the 1st reference point
The angle and distance to the 1st reference point are measured.
The distance can be measured directly to the point or using the reflector rod, depending on ease of access to the 1st
reference point.
Measuring to other points
Measuring to other points is carried out simply by measuring the vertical angles. The difference in height relative to
the 1st reference point is indicated continuously.
Return to previous view.
Continue to "Select further ap-
plications".
Select the "Indirect height meas-
urement" application.
Return to project selection.
Initiate measurement to point.
Continue to the next measure-
ment.
New (additional) indirect height
measurement based on a new
reference point.
Save results.
en
77