Hilti POS 15 Manual De Instrucciones página 12

Illustration Designation
POA 51 reflector rod (imperial)
POAW‑4 reflector foil
PUA 35 tripod
POW 10 adjusting key
Hilti PROFIS Layout
POA 91 copy protection dongle
POW 90 data cable
Description
The POA 51 (imperial) reflector rod
(consisting of four sections (each with
a length of 12" ), the rod point (length
2.03") and the reflector plate (height
3.93" or, respectively, 1.97" to the
middle)) is used to take readings from
points on the ground.
A self-adhesive foil for placing refer-
ence points on raised targets such as
walls or posts.
For use by appropriately experienced
persons only!
PC application that allows positions
(points) to be generated from CAD
data and transferred to the tool.
en
7