Publicidad
Idiomas disponibles
Idiomas disponibles
Contents
1.
Safe handling
1.1
Safe for use in conformance with IEC regulations
1.2
Safety information regarding XBO reflector lamps
2.
Product description
2.1
Scope of supply
2.2
Components required for operation
2.3
Intended use
2.4
Operating principle
3.
Preparation and setup
3.1
First use
3.2
Presetting the correct voltage
4.
Working with the xenon light source
4.1
System set-up
4.2
Function checks
4.3
Safe operation
5.
Validated reprocessing procedure
5.1
General safety instructions
5.2
General information
5.3
Dismantling prior to carrying out the reprocessing procedure
5.4
Preparations at the place of use
5.5
Preparation before cleaning
5.6
Cleaning/disinfection
5.7
Wipe disinfection for electrical devices without sterilization
5.8
Inspection, maintenance and checks
6.
Maintenance
6.1
Replacing xenon lamp
7.
Troubleshooting list
7.1
Fuse replacement
8.
Technical Service
9.
Accessories/Spare parts
9.1
Optical cable accessories
9.2
Optical cable connection accessories
9.3
Accessories for power cord
9.4
Other accessories
9.5
Spare parts
10.
Technical data
10.1 Ambient conditions
11.
Disposal
1.
Safe handling
3
Risk of injury to patients due to inappropriate
4
application!
4
►
The product and accessories should only be
WARNING
4
operated by qualified or trained and experi-
4
enced personnel.
4
►
Transport the product only in its original box.
4
►
Prior to use, check that the product is in good working order.
5
►
Observe "Notes on Electromagnetic Compatibility (EMC)", see
5
TA022130.
5
►
To prevent damage caused by improper setup or operation, and in order
5
not to compromise warranty and manufacturer liability:
6
– Use the product only according to these instructions for use.
6
– Follow the safety and maintenance instructions.
7
– Only combine Aesculap products with each other.
7
– Adhere to application instructions according to relevant norms, see
7
Safe for use in conformance with IEC regulations.
7
►
Inspect the accessories regularly: Electrode cables and endoscopic
8
accessories, in particular, must be checked for possible damage to the
insulation.
8
►
Keep the instructions for use accessible for the user.
8
►
Always adhere to applicable standards.
8
►
Ensure that the electrical facilities in the room in which the device is
8
being used conform to IEC norms.
9
►
Unplug the device by pulling on the plug, and never on the power cord.
9
►
Do not use xenon light sources in areas where there is a risk of explo-
9
sion.
9
11
12
12
12
12
12
12
12
12
13
13
13
3
Publicidad
