Publicidad
Idiomas disponibles
Idiomas disponibles
e)
Do not overestimate your capabilities. Maintain body balance at all times
during operation. This allows for better control of the device in unexpected
situations.
f)
Do not wear loose clothing or jewellery. Keep hair, clothing and gloves away
from moving parts. Loose clothing, jewellery or long hair can be caught by
moving parts.
g)
Remove all adjusting tools or keys before turning the device on. A tool or key
left in the rotating part of the device may cause injury.
h)
The device is not a toy. Children should be supervised to ensure that they do
not play with the device.
i)
Do not place your hands or any objects in the vicinity of the running screw!
1.3.
Safe use of the device
a)
Do not use the device if the ON/OFF switch does not function properly (does
not switch on and off). Devices that cannot be controlled by the switch are
dangerous, must not be operated and must be repaired.
b)
Keep the device in good working order. Before each use, check for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the device). If damaged,
have the device repaired before use.
c)
Keep the device out of the reach of children.
d)
Repair and maintenance of the device should be carried out by qualified
persons using only original spare parts. This will ensure a safe use of the device.
e)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen any screws.
f)
When transporting and moving the device from the place of storage to the
place of use, follow the health and safety regulations for manual transport that
apply in the country in which the device is used.
g)
Avoid situations where the device stops under heavy load during operation.
This can cause overheating of the drive elements and subsequent damage to
the device.
h)
The specified vibration emission value is measured with standard
measurement methods. The vibration emission value may change when the
device is used in other environmental conditions.
i)
Do not cover the air inlet and outlet.
j)
Do not start the device when it is empty.
k)
It is forbidden to tamper with the device in order to change its parameters or
construction.
l)
Keep the device away from sources of fire and heat.
m) Do not overload the device.
Publicidad
