Nussbaum WA 950 Instrucciones De Uso página 61

Never move a vehicle with mounted wheel clamps and
sensor heads
Schließen Sie bitte am Messkopf keine Messkabel an, solange
der Messkopf auf der Ladestation steckt.
Attention!
In this manual the following symbols are used:
Remote control
Operator panel
i
Information - hint
!
Attention! - indicating hazard to the machine or the vehicle
Danger for operating personnel - in general
or specifically
electric hazard, hazard to get squeezed, hazard to get burnt etc.
Further explanation of technical terms may be found in the
appendices.
58
Liability
All data given in this program are based on manufacturer´s or
importers information. Nussbaum GmbH can not be hold liable for
correctness and completeness of software and data. Liability for
any damage done by software bugs or missing or wrong data is
excluded. In any case liability of Otto Nussbaum GmbH is limited
to the amount that the customor has actually paied for the
product. This exclusion does not apply for damage that is done by
intention or gross negligence from Otto Nussbaum GmbH.
Warranty
The use of hard- and software that was not released for the use
with this product changes the product and therefore excludes
what ever liability and warranty even if this hard- and software has
been removed afterwards.
The product may not be changed. Our products are only allowed
to be used with original accessories. Otherwise your warranty will
be void. This Nussbaum test equipment is only allowed to be used
with operating systems released by Nussbaum. If you are using a
different operating system all warranty is void according to our
delivery terms. In addition Nussbaum can not be hold liable for any
further damage done by the use of non released operating
system.
19.03.2010 1 689 979 873N