Configuration And Maintenance - Nussbaum WA 950 Instrucciones De Uso

Procedure change: Switch to the next program step
without having to execute the current, ongoing step
Back to selection
Moves the active cursor from the toolbar to the working
area (desktop)
Quit
Ends the running process
Save
Saves the values of the vehicle pre-setting.
Yes
Confirms the selection or input
No / Cancel
Aborts the selection or input
12.3 Special functions
Calibration check
Checks the calibration of the sensors mounted on the
vehicle
Maximum steering deflection. Selection and de-selec-
tion of the process of maximum steering deflection. The
maximum steering deflection takes place with the elec-
tronic plates, which have to be cleared in the Setup.
Without clearing the plates, the icons are not displayed
on the screen.
Steering deflection
4WS Calling the steering deflection process for vehic-
les with all-wheel drive
Setting of a lifted vehicle
Starts the process for axle setting with the vehicle lifted
End of the setting of the lifted vehicle. Ends the process
of axle setting with lifted vehicle, lower the vehicle.
12.4 Run out compensation (ROC)
ROC with two points
Calling the two-point compensation process
ROC with disks
Calling the push compensation procedure without ve-
hicle-lifting..
ROC all-wheel drive
Calling the compensation process for vehicles with all-
wheel drive
Skip ROC Continues the wheel alignment processes
while skipping the compensation
ROC call
Calling the previously saved compensation values
12.5 Database
Vehicle markets
Selection of the vehicle selling markets from the data-
base.
92
Vehicle description trade name
Vehicle description with the trade name
Vehicle description from manufacturer
Vehicle description with the manufacturer-specified
designations for the unique assignment of the wheel
alignment reference values
Selection of database
Selection of the vehicle database to be used from the
archives
Main database
Selection of the Nussbaum-supplied main archive as a
database archive.
User database
Selection of the secondary archive input by the user as
the database archive.
Both databases
Selection of both databases as the database archive.
12.6 Printing and worksheets
Leads on to the control screen for the print function
12.7 Adjustment help
Starting the available vehicle information
Starts the available information for vehicle setting
Pause
Pauses the Help to be displayed for the vehicle setting
and resumes it again at the same point
Stop
Stops the Help to be displayed and returns to the first
image (only for animation, not for fixed images)
Toe-in front, selection of the Help for the setting of the
toe-in front
Toe-in rear, selection of the Help for the setting of the
toe-in, rear
12.8

Configuration and maintenance

Demo execution of the vehicle wheel alignment pro-
cess in the Demo mode; do not activate sensors
Setup - calling the process for the set up of the wheel
alignment device
19.03.2010 1 689 979 873N