Nussbaum WA 950 Instrucciones De Uso página 92

Sistema para el análisis del chasis
Ocultar thumbs Ver también para WA 950:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Subsequently the year of manufacture and vehicle type must be
selected. Please consider that the selection must be carried out
appropriate to the official car numbers. If you do not know the
official car number, please use the hints of the help menu.
11.2.6 Realisation of the process
In the next screen "Compensation" it is necessary to choose the
Mercedes wheel clamps.
Choice of the Mercedes wheel clamps
By using the Mercedes wheel clamps it is possible to perform the
alignment process without compensation. This is caused in the
fact, that the wheel clamps are positioned on the wheel hub.
Subsequently the pedal depressor must be mounted. It is very
important to use enough power to depress the pedal in order to
recieve a sufficient breaking force.
It is essential for the success of the Mercedes- Process to mount
the pedal depressor before starting the steering procedure, even
if there is no hint on the program screen.
Non- observance causes with high probability serveral
problems during the wheel alignment procedure.
Now it is necessary to mount both the wheel clamps and the
sensor heads. If the car, which shall be aligned, is equipped with
a very low front spoiler, it is necessary to use special accessoires:
1 689 979 873N
19.03.2010
By using the original Mercedes wheel clamps a set of angle
adapters 1 987 009 A0PN is necessary. By using one of the
adapter kits, a set of spoiler adapters 1 987 009 A03N is needed.
Wheel clamp, angle adapter and sensor head
As soon as the emitter is connected, the sensor heads are
switched on and the software configuration is set correctly, the
program will skip automatically the second compensation screen.
Pay attention for the displays of the sensor heads,
which show the inclination. All of them must indicate a
horizontal position of the sensor heads.
The steering wheel procedure has to be performed according to
the indications on the screen. During this procedure you will be
supported by arrows and yellow triangles.
If you cross the 20° steering angle during the steering procedure,
yellow triangles will manage you below 18°, before you can steer
again towards the measuring point of 20°.
Screens during the steering procedure
After the steering procedure it is necessary to fix the steering
wheel with the steering wheel lock 1 987 009 A17N in the 0°-
position.
In order to adjust the steering wheel precisely, a steering wheel
level, which is offered as special accessoire, is helpful. (Basic
version: 1 987 009 A70N or self centering version 1 987 009
A74N)
89

Publicidad

Tabla de contenido
loading

Productos relacionados para Nussbaum WA 950

Este manual también es adecuado para:

Wa 970Wa 900Wa 920Wa 020

Tabla de contenido