Operation Of The Special Accessoires; Vag- Process For Vehicles With Multilink Axles - Nussbaum WA 950 Instrucciones De Uso

Sistema para el análisis del chasis
Ocultar thumbs Ver también para WA 950:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

You then should get the information that upgrade has been
successfully completed.
You now can remove the secondary smart card from smart card
reader.
Keep all the SmartCards in a safe place. They may be
required again during servicing work.
10.1. Request of main smart card, smart card upgrade
- Switch on PC and start alignement software
- From starting screen click:
and
(click
card is missing).
- If there are no upgrades installed, you will see the screen
Diagnostic
- If there is an upgrade already installed, it will show on the screen
Diagnostic_MB_VAG
84
(password „att"),
just to confirm that secondary smart
- If the upgrade has not been done yet:
- Remove cover from backside cabinet (be careful there is a
grounding wire connected to the cover)
- Beside the computer is the black box for the smart card
reader
- Insert the big white smart card into slot B with the chip facing
to the outside
SmartCard_in_Slot_B
- Click
ecundary smart card is transferred to the main smart card.
Then you can remove the secondary smart card.
11.

Operation of the special accessoires

11.1

VAG- Process for vehicles with multilink axles

The process is simply used for vehicles of medium class and
luxury class, which are produced both by the Volkswagen- Audi
1300 8690
- group roughly between 1997/98- 2004/05 and are equipped
with a multilink axle. Following vehicles are concerned:
Audi
Skoda
VW
Requirement for the VAG- Process is the installation of the
smartcard 1 987 009 AS2N. Furthermore you need special
accessories.
11.1.1 Special accessories for the VAG- multilink axles pro-
cess
In order to perform the VAG- multilink procedure it is necessary
to use the measuring bar. We offer you a speciall tool, which is
1300 8690
equivalent to the original VAG special tool 1925, with the cata-
logue no. 1 987 009 A25N.
Special tool for the VAG- Process- 1 987 009 A25N
in the software and the information of the
A4/ A4 quattro/ S4/ RS4
A6/ A6 quattro/ RS6
A8/ A8 quattro/ S8/ S8 quattro
Superb
Passat / Passat Variant
19.03.2010
1300 8670
1 689 979 873N

Publicidad

Tabla de contenido
loading

Productos relacionados para Nussbaum WA 950

Este manual también es adecuado para:

Wa 970Wa 900Wa 920Wa 020

Tabla de contenido