Cub Cadet K21 Manual De Instrucciones página 9

For your safety
Danger! No fires, sparks, naked
flames or smoking
Attention!
Do not dispose of used batteries with
domestic waste.
Warning!
Always remove the ignition key before
getting off the device.
Danger! Unintended activation
Prior to working on the device, remove
the ignition key. Follow the instructions in
this manual.
Attention!
Do not stand on the cutter deck.
Warning! Hot surface
Note
Always keep these symbols in a legible
condition. Replace damaged or illegible
symbols.
Before using your device for the first
time, read these operating instructions
carefully and observe the instructions.
Please store away these operating instruc-
tions for later use or future owners.
Before using for the first time, you must read the
Î
safety information!
Failure to observe the operating instructions and
safety instructions can result in damage to the
device and danger for the operator and other
persons.
Make sure that you are familiar with all controls
Î
and how to use them correctly.
All persons involved with the initial set-up, op-
Î
eration and servicing of the device, must have
appropriate qualifications.
Warning!
Only operate the device
with an attached and low-
ered deflector flap or the
mulch locking part.
Safety information
For your safety
Danger levels of warning information
The following danger levels are used in these
operating instructions, to indicate potentially
dangerous situations:
A dangerous situation is highly likely and, if
the measures are not followed, will result in
severe injury and even death.
A dangerous situation may occur and, if
the measures are not followed, will result in
severe injury and even death.
A dangerous situation may occur and, if
the measures are not followed, will result in
slight or minor injuries.
Attention!
A possibly harmful situation may occur which if not
avoided will result in property damage.
Safety information content
Type and source of the danger!
ÂConsequences of non-observation
¾ Measure for preventing the danger
The making of unauthorised changes or
conversions is not permitted
Do not make any changes to the device or convert
it to make other machinery. Such changes can
result in personal injury and incorrect operation.
Repairs to the device must only be performed
Î
by trained persons who have been instructed to
do so. When doing so always use original spare
parts. This ensures that the safety of the device is
maintained.
DANGER!
WARNING!
CAUTION!
DANGER!
EN
9