Stiga SP 316 C Manual De Instrucciones página 169

WARNING!: READ THE INSTRUCTION BOOKLET THOROUGHLY
EN
BEFORE USING THE MACHINE. Keep for future reference.
INDEX
1. GENERAL INFORMATION ..................................... 1
2. SAFETY REGULATIONS ........................................ 2
3. GETTING TO KNOW THE MACHINE ..................... 4
3.1 Description of the machine and planned use.. 4
3.2 Safety signs .................................................... 5
3.3 Product identification label ............................. 5
3.4 Main components ........................................... 5
4. ASSEMBLY ............................................................. 6
4.1 Assembly components ................................... 6
4.2 Assembly of the guide bar and toothed chain . 6
5. CONTROLS ............................................................ 7
5.1 Engine start/stop switch ................................. 7
5.2 Choke lever .................................................... 7
5.3 Primer control button ...................................... 7
5.4 Throttle trigger lever ....................................... 7
5.5 Interlock lever ................................................. 7
5.6 Handle for manual start .................................. 7
5.7 Chain brake .................................................... 7
6. USING THE MACHINE ........................................... 7
6.1 Preliminary procedures .................................. 8
6.2 Safety checks ................................................. 8
6.3 Start-up .......................................................... 9
6.4 Working ........................................................ 10
6.5 Work techniques .......................................... 10
6.6 Advice for operation ..................................... 12
6.7 Stop.............................................................. 12
6.8 After operation .............................................. 12
7. ROUTINE MAINTENANCE ................................... 12
7.1 General information ...................................... 12
7.2 Preparing the fuel mixture ............................ 12
7.3 Refuelling ..................................................... 13
7.4 Topping up the chain oil tank ........................ 13
7.5 Cleaning the machine and the engine .......... 14
7.6 Cleaning the chain........................................ 14
7.7 Chain catcher ............................................... 14
7.8 Machine and bar lubrication holes ............... 14
7.9 Nuts and bolts .............................................. 14
8. EXTRAORDINARY MAINTENANCE .................... 14
8.1 Cleaning the air filter..................................... 14
8.2 Chain brake metal band ............................... 14
8.3 Chain drive sprocket ..................................... 14
8.4 Checking the spark plug .............................. 14
8.5 Starter cable ................................................ 15
8.6 Maintenance of the toothed chain ................ 15
8.7 Guide bar maintenance ................................ 15
8.8 Tuning minimum speed ................................ 16
8.9 Tuning the carburettor .................................. 16
9. STORING .............................................................. 16
10. HANDLING AND TRANSPORTATION .................. 16
11. ASSISTANCE AND REPAIRS ............................... 17
12. WARRANTY COVERAGE ..................................... 17
13. MAINTENANCE TABLE ........................................ 17
14. CHAIN MAINTENANCE TABLE ............................ 18
15. PROBLEM IDENTIFICATION ............................... 18
16. ATTACHMENTS ................................................... 19
1. GENERAL INFORMATION
1.1 HOW TO READ THE MANUAL
Some paragraphs in the manual contain
important information regarding safety and
operation and are emphasized in this manner:
NOTE or IMPORTANT These give details
or further information on what has been
previously indicated and aim to prevent damage
to the machine or cause other damage.
The symbol highlights danger. Failure to
observe the warning can lead to the risk of
injury to oneself and others and/or damage.
The paragraphs inside a grey dotted frame
refer to optional features not available on all
the models referred to in this booklet. Check
if the feature is available on your model.
Whenever reference is made to a position on the
machine "front", "back", "left" or "right" hand side,
this refers to the operator's working position.
1.2 REFERENCES
1.2.1 Figures
The figures in these instructions for
use are numbered 1, 2, 3, etc.
The components indicated in the figures are
identified with letters A, B, C, and so on.
Reference to component C in figure
2 is indicated with the wording: "See
fig. 2.C" or simply "(Fig. 2.C)".
The figures are given as a guide only.
The actual pieces can differ from
those illustrated in this document.
1.2.2 Titles
The manual is divided into chapters and
paragraphs. The title of paragraph "2.1 Training" is
a sub-title of "2. Safety regulations". References
to titles or paragraphs are marked with the
abbreviation chap. or par. and the relevant
number. Example: "chap. 2" or "par. 2.1.
EN - 1