Descargar Imprimir esta página

LaCimbali M40 Manual De Uso Y Mantenimiento página 50

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 132
EN
1. Active: allows you to set 3 different values:
• Yes: automatic on/off mode is enabled, with the
set times and day of closure.
• No: automatic on/off mode is disabled
• Eco: automatic on/off mode is enabled, with the
set times and day of closure. During the OFF
time, the appliance resistor is not completely de-
activated so the water heater pressure can be
kept at 0.2 bar
2. ON: allows you to set the switch-on time
3. OFF: allows you to set the switch-off time
4. Closure: allows you to set the day of closure
7.1.3.2 SETTING THE TIME
2 1
2 2
2 3
1. Hours: used to set the hours of the time visualised
2. Minutes: used to set the minutes of the time visual-
ised
3. Style: press to set the time visualisation style
7.1.3.3 SETTING THE DATE
2 1
2 2
2 3
1. Day: allows you to set the day of the date visualised
2. Month: allows you to set the month of the date
visualised
3. Year: allows you to set the year of the date visual-
ised
50
Fig. 7.4 - Time menu
Fig. 7.5 - Date menu
7.1.4
LANGUAGE SELECTION
Fig. 7.6 - Language selection menu
• Press the icon of the language you want to set for the
display screens.
7.1.5
METERS
2 1
2 2
Fig. 7.7 - Counters menu
1. Count.: used to visualise the following parameters:
• Coffee group [...]: number of coffee-based bever-
ages dispensed by that dispensing group
• Water: number of water dispensing operations
• Steam: number of steam delivery operations car-
ried out with button 1 of the turbosteam selector
(1 - Fig. 5.3)
• Steam + Air: number of steam delivery operations
carried out with buttons 2, 3 and 4 of the turbosteam
selector (2,3,4 - Fig. 5.3)
• Tot. coffee: total number of coffee-based beverag-
es dispensed
2. Sel. count.: used to see the number of beverages
dispensed on the basis of the single appliance but-
tons relating to:
• Dispensing group [...]: number of beverages dis-
pensed by the single dispensing buttons (1, 2, 3, 4,
5 - Fig. 5.1) of a specific dispensing group
• Water: number of dispensing operations by the
single hot water buttons (1, 2, 3 - Fig. 5.2)

Publicidad

loading