Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Information and safety instructions for the owner
DANGER!
Improper access to and opening of the machine.
Electric shock.
X Disconnect the system from the mains.
X Disconnect all devices connected externally to the machine (welding tongs, etc.).
X Allow machine to cool down sufficiently before opening.
X Allow only a professional electrician to access the electrical system.
X Never connect an opened system to the mains network.
DANGER!
Liquid in the housing due to improper use and transport!
Electric shock.
X Do not place liquids (e.g. beverages) on the system.
X Do not block ventilation slots.
X Check housing interior for moisture after transporting the machine and leave it open to
air it out if necessary.
DANGER!
Damaged plugs!
Electric shock.
X Do not use adapter plugs together with protectively grounded power tools.
X Ensure that the connecting plugs of the machine fit into the outlet.
DANGER!
Defective safety parts due to soiling, breakage and wear!
Bodily injury due to failure of safety parts.
X Do not misuse the cable, for example by suspending or carrying the machine by the
cable.
X Replace defective safety parts immediately and check daily for proper functioning.
X Have an expert replace defective power cables immediately.
X Clean and maintain machine after every use.
X Keep cable away from heat, oil, sharp edges and moving device parts.
X Check machine daily for externally visible damage and defects and have them remedied
by a professional if necessary.
WARNING!
Danger of system (such as ORBICAR welding carriage, gas bottle, Orbital
welding power supply source, cooling unit) tipping over from the applica
tion of force from outside!
Various injuries and damage to property.
X Set up the machine so that it stands securely against external influences.
X Keep moving masses at least 1 meter away from the machine.
WARNING!
Electromagnetic incompatibility of surrounding devices during highfre
quency ignition and devices in operation without a protective ground!
Various injuries and damage to property.
X Use only electrical devices with protective insulation in the working area of the welding
system.
X Observe electromagnetically-sensitive devices when igniting the system.
WARNING!
Hot , leaking liquids and hot plug connections during heavy operation!
Danger of scalding.
X Heed the safety precautions of the technical supervisor/person in charge of safety.
WARNING!
Poisonous vapors and substances during the welding process and handling
of the electrodes!
Health problems, including cancer.
X Use extraction devices in accordance with the professional association regulations
BGI: 7006-1).
X Extra caution is required with chrome, nickel and manganese.
X Do not use electrodes containing thorium.
68
ORBITALuM TOOLS GmbH D-78224 Singen www.orbitalum.com
ORBIWELD TP 400, TP 600
(e.g.
[REV. 20231027] OW_ORBIWELD_TP_BA_812060201_01__INH-01_EN
ORBIWELD TP 400, TP 600
3.
DESCRIPTION
3.1
Basic machine
[REV. 20231027] OW_ORBIWELD_TP_BA_812060201_01__INH-01_EN
ENGLISH
Description
69
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
Publicidad
