Descargar Imprimir esta página

Champion Power Equipment 97001i-P-EU Manual Del Operador página 20

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 191
97001i-P-EU
A
Do not expose to rain or use in damp locations.
Keep all objects a minimum of 5 feet (1.5m) away from the
generator at all times. Heat from the muffler surface and
exhaust gas stream can ignite combustible materials.
A
If you must operate in rain or damp locations, DO NOT operate
without proper protection of the electrical components.
Use of a safety canopy that is fire retardant and will provide proper
air ventilation for the engine exhaust gas stream may be used.
Wireless Set Button
The wireless set button is a feature that lets the user synchronize
the remote key fob transmitter to the generator. Up to two remote
key fobs transmitter can be synchronized to the generator at a
time. Follow the proceeding steps to reset a remote or synchronize
two remotes:
1. Turn the fuel dial to the "ON" position.
2. Press the Start/Stop button to enter standby mode.
WARNING
WARNING
3. Push and hold the wireless set button found on the
Intelligauge for approximately three seconds until the button
LED illuminates blue.
4. Push and release the "STOP" $ button on the remote key
fob transmitter. The green LEDs on the remote key fob
and the Start/Stop button will blink once simultaneously to
indicate program is erased and generator is ready for pairing.
5. Push and release the "START" a button on the remote
key fob transmitter. The green LEDs on the remote key fob
and the Start/Stop button will blink once simultaneously to
indicate the remote has been programmed."
20
OPERATION

Publicidad

loading