Instructions - Metcalfe TR 75 Manual De Instrucciones Para Uso Y Manutención

Produces different kinds of noodles and is basically made up of a
kneading part and an extrusion unit in order to cut the finished product
• The elements in contact with the noodles
are made of stainless steel or bronze for
foodstuffs.
• Moving parts mounted on ball bearings
with long-life sealing gaskets or with sup-
ports with greaser.
• Motor-powered; belt transmissions with
maintenance-free reduction gear and
mixer chain.
• Machine fitted with support toes with ela-
stic caps and, on request, trolley with four
wheels, 2 of which fitted with a brake and
machine corner retaining rims.
• Connection by flameproof power cable
according to the supply voltage required,
standard length L = 3 m, without terminal
plug.
• Accessories supplied:
- pasta-collecting frame
- metal ring blocking key
- liquid measuring jar.
• Pasta cutting unit, fitted with a low voltage
operated motor and cutter.
• Power:
Model
230 50-60 Hz. 400 50-60 Hz. 415 50-60 Hz.
TR 75/C
YES
TR 95
YES
TR 110
YES
TRD 110
YES
TR 110 S
YES
TRD 110 S
YES
The machine has been foreseen only for the preparation of cereal-based flour noodles
for noodle shops and catering facilities.
For reasons of hygiene, health and warranty, it is strictly prohibited to use the
machine for the processing of substances other than foodstuffs. Any other uses
are contrary to the applications, as originally intended by the manufacturer, who shall
as a consequence, not be held liable for any damage to the machine itself or to other
objects, or for any injuries to persons that may arise thereof. In taking the risk of misu-
se, the user will be held responsible for any consequences.
Always keep children away from the machinery.
NOODLES PRODUCING MACHINE
3-phase standard power
YES
YES
YES
YES
YES
YES

INSTRUCTIONS

WARNING
• Fan for drying the pasta surface, to pre-
vent product from sticking.
• Working elements with the ability of turning
in two directions: this enables the knea-
ding of the initial dough, not yet ready,
without any damage to the drawing group.
• Iron parts are protected with stove-ena-
melled epoxy coating.
• Easy disassembling of the working parts;
the machine is freely accessible in order to
carry out thorough cleaning.
• The possibility of obtaining different pro-
ducts thanks to the change of the relevant
drawplate.
• Cooling unit with extrusion sleeve to ensu-
re an ideal temperature and control of
parts in contact with the product, from
model TR 95 to model TRD 110 S, on
request only on model TR 75.
• Mod. TRD 110 and TRD 110 S: Machine
with twin dough preparation tank for conti-
nuous production. Independent controls
and inspection of the second tank.
1-phase optional power
110 60 Hz.
YES YES
/
YES
/
YES
/
YES
/
YES
/
YES
32
230 50-60 Hz. 240 50 Hz.
YES YES
YES YES
YES YES
/ /
/ /
/ /