Compatibility Of Components - DBI SALA 3400101 Manual De Istrucciones

◊ Heat: This equipment is not designed for use in high tempera-
ture environments. Provide protection for this equipment when
using near welding, metal cutting, or similar activities. Hot
sparks may burn or damage this equipment.
• Note: Synthetic rope lifelines are not fl ame proof and must
not be exposed to extreme heat. Do not use the following
in environments or contact surfaces over the specifi c
temperatures given:
• Spectra rope to 60° C
• Vectran rope to 120° C
◊ Electrical: Due to the possibility of electric current fl owing
through the wire rope lifeline, use extreme caution when work-
ing near high voltage power lines.
Contact Capital Safety if you have questions about using
this equipment where environmental or physical hazards
exist.
IMPORTANT: Refer to applicable standards governing this
equipment for more information on personal fall arrest or restraint
systems and associated system components.
• COMPATIBILITY OF COMPONENTS: This equipment is designed
for use with Capital Safety approved components and subsystems
only. See also GIUM Section 1.12.
• COMPATIBILITY OF CONNECTORS AND MAKING CONNEC-
TIONS: Connectors (hooks, carabiners, D-rings) must be capable
of supporting at least 22 kN. Connectors must be compatible with
the anchorage and other system components and meet EN362
standards. See Figure 9: A-Anchorage; B-Connector; C-Anchorage
Connector, D-Mounting Bracket; E-Tripod Leg. See also GIUM Sec-
tion 5 and Figures for EN362.
• ANCHORAGE STRENGTH: The anchorage strength required is de-
pendent on the application type. Anchors must meet requirements
of EN795. See also GIUM Section 12.
• HORIZONTAL SYSTEM: In applications where an SRL is used
in conjunction with a horizontal system (i.e. horizontal I-beams
and trolleys), the SRL and horizontal system components must be
compatible. Horizontal systems must be designed and installed
under the supervision of a qualifi ed engineer.
• OPTIONAL RETRIEVAL SYSTEM: When using an SRL with an
optional retrieval system, ensure the support structure (i.e. tripod,
davit arm) is compatible with the connection, operation, stabil-
ity and strength of the SRL. See Figure 10-Optional Mounting for
Model 3400614: A-Hex Lock Nut, M12 x 1.75, Zinc Plated (ZP);
21