1.12 Returning Devices; 1.13 Disposal; Information On Weee Directive 2012/19/Eu (Waste Electrical And Electronic Equipment) - ABB ProcessMaster FEP300 Manual Del Usuario

Safety

1.12 Returning devices

Use the original packaging or suitably secure shipping containers if you need to return the
device for repair or recalibration purposes. Fill out the return form (see the Appendix) and
include this with the device.
According to EC guidelines for hazardous materials, the owner of hazardous waste is
responsible for its disposal or must observe the following regulations for shipping purposes:
All devices delivered to ABB Automation Products GmbH must be free from any hazardous
materials (acids, alkalis, solvents, etc.).
Rinse out and neutralize hazardous materials from all hollow spaces such as between meter
tube and housing. For flowmeters larger than DN 400, the service screw (for draining
condensate fluid) at the lower point of the housing must be opened to dispose of hazardous
substances and to neutralize the coil and electrode chamber. These activities must be
confirmed in writing using the return form.
Please
Please contact Customer Center Service acc. to page 1 for nearest service location.

1.13 Disposal

This product is manufactured from materials that can be reused by specialist recycling
companies.

1.13.1 Information on WEEE Directive 2012/19/EU (Waste Electrical and Electronic Equipment)

This product is not subject to WEEE Directive 2012/19/EU or relevant national laws
(e.g., ElektroG in Germany).
The product must be disposed of at a specialist recycling facility. Do not use municipal garbage
collection points. According to the WEEE Directive 2012/19/EU, only products used in private
applications may be disposed of at municipal garbage facilities. Proper disposal prevents
negative effects on people and the environment, and supports the reuse of valuable raw
materials.
If it is not possible to dispose of old equipment properly, ABB Service can accept and dispose of
returns for a fee.
10 - EN FEX300, FEX500 CI/FEX300/FEX500-X1