ABB ProcessMaster FEP300 Manual Del Usuario página 128

Language
German
Next
Q (Flowrate) Unit
Next
Qmax
Next
Totalizer/Pulse Unit
Next
Operation
Next
CI/FEX300/FEX500-X1
Easy Setup
Edit
Easy Setup
l/s
Edit
Easy Setup
25.000 l/s
Edit
Easy Setup
m³
Edit
Easy Setup
Pulse Mode
Edit
FEX300, FEX500
10. Use to call up the edit mode.
11. Use or to select the desired language.
12. Confirm the selection with
13. Use to call up the edit mode.
14. Use or to select the desired unit.
15. Confirm the selection with
16. Use to call up the edit mode.
17. Use or to set the desired upper range value.
18. Use to confirm your setting.
19. Use to call up the edit mode.
20. Use or to select the desired unit.
21. Confirm the selection with
22. Use to call up the edit mode.
23. Use or to select the required operating mode.
• "Pulse Mode": In pulse mode, pulses per unit are
output. The relevant settings are provided in the next
menu
• "Fullscale Frequency": In frequency mode, a frequency
proportional to the flow rate is output. The maximum
frequency can be configured according to the flow
measuring range
The factory default for the operating mode is "Pulse Mode".
24. Confirm the selection with
Commissioning
.
.
.
.
EN - 55