ABB ProcessMaster FEP300 Manual Del Usuario página 129

Commissioning
Pulses per Unit
Next
Pulse Width
Next
Damping
Next
Iout at Alarm
Next
Low Alarm Value
Next
High Alarm Value
Next
56 - EN
Easy Setup
10.000 / m³
Edit
Easy Setup
30.00 ms
Edit
Easy Setup
30.00 ms
Edit
Easy Setup
High Alarm
Edit
Easy Setup
3.5000 mA
Edit
Easy Setup
21.800 mA
Edit
FEX300, FEX500
25. Use to call up the edit mode.
26. Use or to set the desired value.
27. Use to confirm your setting.
28. Use to call up the edit mode.
29. Use or to set the required pulse width.
30. Use to confirm your setting.
31. Use to call up the edit mode.
32. Use or to set the desired damping.
33. Use to confirm your setting.
34. Use to call up the edit mode.
35. Use or to select the alarm mode.
36. Confirm the selection with
37. Use to call up the edit mode.
38. Use or to set the required current for Low
Alarm.
39. Confirm the selection with
40. Use to call up the edit mode.
41. Use or to set the required current for High
Alarm.
42. Confirm the selection with
.
.
.
CI/FEX300/FEX500-X1