Electric Control Panel For The Electric Jockey Pump - Lowara GEM Instrucciones Para La Instalación Y El Uso

9

ELECTRIC CONTROL PANEL FOR THE ELECTRIC JOCKEY PUMP

Data refer to standard-design product.
9.1 General
Electric panel for the electric jockey pump installed on pressure modules or provided as an additional kit. The motor is protected
against overload by an automatic switch.
Ready for connection to a float switch or minimum pressure switch for prevention of dry running. An optional level control
module (supplied on request) enables the connection of probes to electrodes with the possibility of adjusting sensitivity based on
water hardness.
A set of dry contacts is available on request for monitoring panel status
- Pump running.
- Thermal overload.
- No water.
1 - Signals
- Power supply voltage, white light.
- Thermal overload, red light.
1
- Pump running, green light.
2 - Three-position selector switch
- "MAN" (MANUAL):
2
- "AUT" (AUTOMATIC): Motor start-up and shut-off from pressure switch.
- "0" (DISABLED):
3 - Main door-lock switch
ON Main door-lock switch which acts as a cut-off and emergency stop
device. It can be padlocked in its "OFF" position.
3
GEN_0020_A_SC
starts the motor in manual mode.
Electric pump disabled.
73