Publicidad
Idiomas disponibles
Idiomas disponibles
Temp
1. Temp unit
You can program the oven control to display the temperature in Fahrenheit or
Celsius. The oven has been preset at the factory to display in Fahrenheit.
•
Tap SETTINGS > Temp > Temp unit, then tap the right screen and select °C or °F.
2. Temp adjust
Oven temperature is factory calibrated. When first using the oven, follow recipe
times and temperatures. If the oven cooks too hot/cool, you can recalibrate the oven
temp. Before doing so, test a recipe by using a higher/lower temp than the recipe
stipulates. The results will help you to decide the degree of adjustment. (Oven temp
can be adjusted ±35 °F (±19 °C). This adjustment will not affect broil or the self-
clean temp's. The adjustment will be retained after a power failure.
•
Tap SETTINGS > Temp > Temperature Adjust, then tap in the right screen and
adjust the temp.
•
Temp can be increased/decreased by 35 °F (19 °C).
Volume
Adjust the volume level for beeps and melodies.
•
Tap SETTINGS > Volume, then use the adjacent bar to adjust the volume.
Lighting
Dacor's Pro range has two distinctive lighting features: 'Shower lighting' shines on knobs
from above; 'Welcome lighting' is an array that appears when you lift the LCD panel.
•
To adjust Shower lighting, tap SETTINGS > Lightings and select On, Automatic, or Off.
•
To adjust Welcome lighting, tap SETTINGS > Lightings and select On or Off.
12- hour Energy Saving
This feature turns the oven off after 12 hours of baking or 3 hours of broiling.
1. Tap SETTINGS > 12 hour energy saving, then tap ON on the right screen.
2. The 12-hour energy saving icon appears in the indicator area.
Water Hardness (DOP48C86D** only)
Adjust water hardness for the Steam oven. (The harder the water, the more you need to
descale.)
•
Tap SETTINGS > Water hardness and select Soft, Medium, or Hard.
FULL_DOP36C86DLSDA_DG68-01507A-00_EN+MES+CFR.indb 71
FULL_DOP36C86DLSDA_DG68-01507A-00_EN+MES+CFR.indb 71
English 71
2023-02-23 오후 5:09:09
2023-02-23 오후 5:09:09
Publicidad
