Publicidad
Idiomas disponibles
Idiomas disponibles
About Burner Caps and Heads
Wash the caps and heads in hot, soapy water, then rinse them under the tap. You may
scour with a plastic scouring pad to remove burned-on residue. Use a sewing needle or
twist tie to unclog the small holes in the burner head, if needed. After cleaning, return
all burner caps and heads to their original positions.
CAUTION
Burner parts are not dishwasher safe. Do not use steel wool or scouring powders to
clean them.
Brass burners
Brass burners
Brass burner cap
Brass burner cap
About Burner Bases
CAUTION
•
The burner bases are not removable.
•
Allow no water in the burner bases and the brass gas orifices.
•
Wipe them clean with a damp cloth, being careful not to damage the bases.
Dry the bases completely before using the cooktop.
FULL_DOP36C86DLSDA_DG68-01507A-00_EN+MES+CFR.indb 87
FULL_DOP36C86DLSDA_DG68-01507A-00_EN+MES+CFR.indb 87
•
The brass parts will discolor. However,
this will not affect performance.
•
After cleaning, check that all burner
ports are unclogged.
•
You may swap the original burner
caps for porcelain caps.
•
To remove burnt-on grease, soak the
cap in a solution of 1 cup water and
either 1 tbsp white vinegar or lemon
juice. Do not clean with a metallic
brush, which can damage the brass.
English 87
2023-02-23 오후 5:09:12
2023-02-23 오후 5:09:12
Publicidad
