Publicidad
Idiomas disponibles
Idiomas disponibles
RIVKLE
®
NEO P107 - Instruction manual
4. Safety guidelines
4-1 Working conditions
The user manual must always be kept on the tool's
site of use and must be easily accessible for operators.
Staff tasked with operating the setting system must
have read and understood the instruction manual,
the illustrations and the specifications provided
with this tool and in particular the chapter "Safety
guidelines", before starting any work with the machine.
Failing to follow the instructions listed below may
cause material damage and/or bodily injury.
WARNING
Injury risk!
Working with the machine entails potential risks.
Always wear safety goggles, protective gloves,
hearing protection and close-fitting work clothes.
Spare parts must meet the technical requirements
set by Böllhoff. This is still the case when original
spare parts are used.
You should follow the inspection frequency indicated
in the user manual.
Keep the working area and the tool clean, and ensure
the area is sufficiently lit. Move away from messy
areas, dark areas, electrical cables, gas channels,
explosive atmosphere zones, and any other
phenomenon or machinery which may damage
the tool or which may cause safety accidents.
Any limitation in the freedom of movement of the
staff operating the tool may result in malfunctions
and accidents.
The tool must be protected from external influences
that may cause corrosion, attack and/or damage
the components in any way and thus disturb their
functioning and alter their resistance.
Keep children and others away from the tool when
it is in use. Distraction may result in the user losing
control of the tool
4-2 Personel qualification
Only trained, qualified and experienced operators,
who have read and understood the user manual and
the risks undertaken, may install, adjust or use this
tool. The operator must stay vigilant and be physically
capable of handling, using and transporting the tool,
whilst also complying with the basic safety principles.
The operator must clearly define the responsibilities
of each individual in terms of use, adjustment,
maintenance and repairs.
Interns or individuals in training are not authorised to
work on the tool without the permanent supervision
of an experienced individual. Keep this tool out of the
reach of individuals who are not familiar with it or with
its operating instructions. Tools can be dangerous in
the hands of novice users.
The various tasks to be carried out with the machine
require a variety of qualifications, which are listed
in the table below. The various qualifications are
characterised by the following skills and knowledge:
n
Operators must be able to fit the tool or modify its
fittings as well as operate the machine. They must
identify any damage to the tool and the hazards
associated with it.
n
Adjustment technicians, besides the capacities
specific to operators, must be able to adjust the
setting force, the anvil and the push-pull system.
They must also be able to check the setting force
and the pulling stroke at regular intervals.
Read the table on page 11 in the following way, e.g.:
"The assembly of the mandrel requires operator
qualifications. "
"The resolution of defects, repairs and maintenance
work must be carried out by a product maintenance
technician certified by Böllhoff. »
EN
42
Publicidad
