Publicidad
Idiomas disponibles
Idiomas disponibles
RIVKLE
®
NEO P107 - Instruction manual
PLEASE NOTE
In extremely rare cases, it's possible that
neither the automatic unscrewing or the manual
unscrewing are sufficient for removing the blind
rivet nut from the tool.
Use hand protection
Description of operations
Tools:
1
21 mm spanner
1-A The tool cannot unscrew automatically,
nor can it unscrew using the
manual unscrewing button.
1-B Place a 21 mm spanner
onto the two flat surfaces
of the nose.
1-C Unscrew the nose as far
as possible, then remove
the 21 mm spanner.
1-D By hand, align the
oblong hole in the nose
with the hole in the
traction bush (shown
in yellow in the image).
Tools:
2
5 mm pin punch
2-A By hand, turn the tool
clockwise or anti-clockwise.
2-B Align the hole of the
traction bush (yellow) with
the hole in the mandrel
(shown in dark blue in
the image).
2-C Insert a 5 mm pin punch.
2-D Unscrew the tool until the
mandrel is completely free
of the blind rivet nut, then
remove the pin punch.
2-E The mandrel is unscrewed
from the RIVKLE
®
.
EN
52
Publicidad
