Publicidad
Idiomas disponibles
Idiomas disponibles
RIVKLE
®
NEO P107 - Instruction manual
10. Packaging, transport and storage
Package up the tool and accessories in the carry
case for transport and storage.
The hydro-pneumatic tool in its packaging must be
stored and transported in the following conditions:
Temperature between -20°C and +70°C
n
n
Relative humidity from 5% to 80%
With or without its packaging, the appliance must
not be subjected to aggressive or corrosive
atmospheres.
The tool, without its packaging, must be used in the
following conditions:
n
Temperature from 0°C to +40°C
n
Relative humidity from 5% to 80%
11. End-of-life management
Böllhoff is a company committed to an eco-
responsibility protocol. The health and safety of its
employees and strict compliance with environmental
standards are counted amongst Böllhoff's priorities.
Help us contribute to looking after our environment
and nature should you need to replace it one day:
n
If this tool needs to be replaced at any point,
it must not be disposed of with household waste.
Dismantle it and recycle its various components
depending on the nature of the materials. Wear
parts or replaced parts during maintenance or
repair must be placed in the appropriate recycling
containers (in line with the applicable local
regulations).
n
The recyclable materials used for the tool will
namely be:
- Steel
- Aluminium
- Brass
- PA6/TPU/POM plastic
EN
61
Publicidad
