Publicidad
Idiomas disponibles
Idiomas disponibles
RIVKLE
®
NEO P107 - Instruction manual
ISSUE
MANUAL UNSCREWING
Manual unscrewing isn't
working (the tool is blocked
over the application)
(Use the forced unscrewing
procedure - Paragraph 6.4)
PLEASE NOTE
If the function could not be restored, please contact a Böllhoff-certified repair centre or your maintenance
service, if they have completed Böllhoff-certified training.
PROBABLE CAUSES
1- Setting force too high
2- Blind rivet nut tapping or mandrel
thread damaged
3- Insufficient service pressure
SOLUTIONS
1- Check the setting force in the RIVKLE
Check the setting force set on the tool (Paragraph 5.4) /
Check the setting force of the tool using the RIVKLE
FC340 force indicator / Increase the check frequency
(Paragraph 5.4).
2- Refer to the "setting" section of this document
3- Check the service pressure (Paragraph 5.5).
EN
®
catalogue /
®
55
Publicidad
