Publicidad
Idiomas disponibles
Idiomas disponibles
RIVKLE
®
NEO P107 - Instruction manual
Use
Cleaning
Assembly/replacement of the mandrel
Assembly/replacement of the anvil
Force adjustment
Force/Pulling stroke check
Push-Pull system adjustment
Fault resolution according to Chapter 7-2 - Pages 53, 54, 55
Fault resolution, repair and maintenance
4-3 General safety guidelines for hydro-
pneumatic tools
WARNING
Read all of the safety warnings, instructions, illustrations
and technical specifications provided with this hydro-
pneumatic tool. Any breach of the following guidelines
may cause serious injuries. Keep all safety guidelines
and instructions for future reference.
The term "hydro-pneumatic tool" used in the safety
guidelines refers to tools driven by compressed air
but which have a hydraulic traction force. Tools may
be dangerous in the hands of novice users who are
not familiar with them or who have not read their
operating instructions.
Individual safety
n
Take care and pay attention to what you are
doing. Work as carefully as possible with a
hydro-pneumatic tool. Do not use the hydro-
pneumatic tool if you are tired or under the
influence of drugs, alcohol or medication. A
moment of distraction during use of the machine
may cause serious injuries.
n
Wear personal protection equipment and
always wear safety goggles. Injury risks can be
reduced by wearing personal protection equipment
such as dust masks, non-slip safety boots, helmets
or heating protection, depending on the type and
implementation of the hydro-pneumatic tool.
Operator
n
n
n
n
Avoid any false triggering. Make sure that the
hydro-pneumatic tool's cycle start trigger,
"push-pull" screwing system or manual
unscrewing system have not been activated
before connecting it to the compressed air
supply, picking it up or carrying it. An accident
risks occurring if the cycle start trigger, the push-pull
screwing system or the manual unscrewing system
of the hydro-pneumatic tool are activated while
you're carrying it, if it's connected to the compressed
air supply.
n
Avoid any abnormal posture. Make sure that
your position is stable and that you keep
your balance at all times. This allows you to
have better control of the hydro-pneumatic tool in
the event of an unexpected situation.
Wear appropriate clothing. Do not wear
n
loose clothing or jewellery. Keep your hair
and clothing out of the way of moving parts.
Loose clothing, jewellery or long hair may get
caught in moving parts.
n
Do not fall into a false sense of security and
continue to remain actively aware of the
safety rules, even if repeated use means that
you are familiar with the hydro-pneumatic
tool. It only takes a second for any negligence in
handling to cause serious injury.
DANGER
Please note that, if a part, accessory or the tool
itself breaks, this may cause high-speed pro-
jectiles or sudden shocks on the tool's handle.
Böllhoff Mainte-
Regulator
nance Technician
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
EN
43
Publicidad
