Angelo Po BX61G Manual De Uso página 177

REPLACEMENT OF THE BURNER NOZZLE
To carry out this operation, proceed as follows.
1) Undo the screws to remove the side panel (A).
2) Disconnect the gas supply line (B).
3) Remove the injector (C) and replace it with the one suitable for the type of gas in use (see
table at back of manual).
Caution - Warning
Take care to ensure that the nozzle (C) is correctly positioned (see diagram).
4) Reconnect the pipe (B), replace the panel (A) and retighten the screws when the operation is
complete.
REPLACING THE FUSE
To carry out this operation, proceed as follows.
1) Undo the screws to remove the side panel (A).
2) Open the fuse-holder (B) and replace the damaged fuse (C).
3) Replace the fuse-holder and the side panel when the operation is complete.
3338970_GB_inst
A
B
C
A
B
- 15 -
C
C
GB
ENGLISH