Angelo Po BX61G Manual De Uso página 38

– The button modifi es the preset standard regenera-
tion programs.
Press the key to show the program of choice on the
display (11).
Press the button (2) to start the program selected.
Once the program has been started only, buttons
(6-7- 8-9) and knob (10) can be used to modify the
values set for the current stage.
During cooking, buttons (3-4-5) can be used to
modify the cooking mode.
Note: Changes made in this way only remain ac-
tive for the current cooking process; to save them
permanently, press the button of the cooking
mode (3-4-5) being used for at least 3 seconds.
Important
To return to the original settings, with the
appliance in the STOP phase (green light of
button (2) on),press the button (14) and hold it
down for longer than 3 seconds (the whole panel
powers down) then press the button (15) until
PrG ok appears.
15) Fun speed button
With the appliance in START phase only (after
cooking starts) press the button to set the fan at
intermittent speed:
– Button (15) off : maximum speed.
– Button (15) lit and display (13) with rotating
dot: intermittent speed.
16) Quick cooling button / Semiautomatic wa-
shing button:
Press the (16) button once to select "semi-automa-
tic washing", press the (16) button twice to select
the "quick cooling" function.
With the "quick cooling enabled" function:
– for cooling the cooking chamber quickly with the
door closed.
Press the button and the display (11) will show the message "100°C" and the display (12) the
message "CLd".
GB
Press the button (6) and turn the knob (10) to set the cooling temperature required.
Press the key (2) to start the program. At the end of the cycle the appliance shuts down and a
buzzer sounds.
– For enable / disable the function of cooldown during cooking.
With the appliance in the STOP phase (green light of button (2) on),press the button (14) and
hold it down for longer than 3 seconds (the whole panel powers down).
Press button (16) and turn the knob (10) for selecting the "cooldown ON/OFF" mode.
Press button (16) to save the selected function.
Important
Do not use this function while cooking is in progress.
With the "semi-automatic washing" function enabled: press the (2) button to start semi-auto-
matic washing.
17) The "delay start" button: is used to start delayed cooking.
Press the (17) button and the display (12) will show the max. delay start time (1 hour).
Press the (7) button and turn the knob (10) to set the desired value.
Press the knob to store the value and then press the (2) button to begin the delayed start.
To interrupt the countdown and exit from the function, press the (2) button (cooking does
not start).
If you wish to start cooking before the set time has elapsed, press the (7) button and turn the
(10) knob to bring the value displayed (12) to "0".
18) Main switch: for switching the electricity supply to the appliance.
19) Burner icon: when lit, this indicates the burner is on.
3338970_ut_GB
3 4 5
19
1
11
6
REAL
7
8
INJ
14
15
10
- 10 -
2
12
9
13
17
16
18
ENGLISH