Panel Removal And Installation - Yamaha YFZ450T Manual Del Propietário

1. Panel A
1. Cache A
1. Panel A
1. Quick fastener screw
1. Vis à serrage rapide
1. Perno del fijador rápido
2. Bolt
2. Boulon
2. Perno

Panel removal and installation

The panel illustrated needs to be removed to per-
form some of the maintenance described in this
chapter.
Refer to this section each time the panel has to be
removed or installed.
Panel A
To remove
1. Remove the seat. (See page 4-27 for seat re-
moval and installation procedures.)
2. Remove the quick fastener screw and the
bolts, and then remove the panel by pulling it
out from the front of the ATV.
8-17
EBU08070
EBU13921