1. Bolt
1. Boulon
1. Perno
1. Spark plug cap
1. Capuchon de bougie
1. Tapa de bujía
4. Pull the panel backward, and then remove it.
5. Install the fuel tank cap by turning it clock-
wise.
6. Remove the bolt, lift the rear of the fuel tank,
and then tilt it back.
WARNING
_
Before lifting the fuel tank, make sure that the
fuel cock is in the "OFF" position and the fuel
tank cap is securely tightened. Otherwise, fuel
may leak out of the carburetor or fuel tank.
_
7. Remove the spark plug cap.
8-55