Engine Oil And Oil Filter Element - Yamaha YFZ450T Manual Del Propietário

Engine oil and oil filter element

The engine oil level should be checked before
each ride. In addition, the oil must be changed and
the oil filter element replaced at the intervals spec-
ified in the periodic maintenance and lubrication
chart.
To check the engine oil level
1. Place the ATV on a level surface.
2. Start the engine, warm it up until the engine
oil has reached a normal temperature of
40 °C, let it continue to idle for ten seconds or
more, and then turn the engine off.
NOTE:
_
To achieve the proper engine oil temperature for
an accurate oil level reading, the engine must
have first completely cooled down, and then
warmed up again for several minutes to normal
operating temperature.
_
8-23
EBU13932