Changing The Coolant - Yamaha YFZ450T Manual Del Propietário

1. Coolant drain bolt
1. Boulon de vidange du liquide de refroidissement
2. Feuille de papier pliée comme illustré
1. Perno de drenaje de refrigerante
2. Elemento de paso
1. Radiator cap
1. Bouchon de radiateur
1. Tapa del radiador
2. Trough

Changing the coolant

WARNING
_
Wait for the engine and radiator to cool before
removing the radiator cap. You could be
burned by hot fluid and steam blown out under
pressure. Always put a thick rag over the cap
when opening. Allow any remaining pressure
to escape before completely removing the cap.
_
1. Place the ATV on a level surface.
2. Remove panel A. (See page 8-17 for panel
removal and installation procedures.)
3. Place a container under the engine, and then
remove the coolant drain bolt. (Use a trough
or a similar object as shown.)
4. Remove the radiator cap.
8-45
EBU14130