Malaguti SPIDER MAX GT 500 Manual Diagnóstico página 202

SPIDER MAX 500
- Extract the pressure regulator and the O-rings.
NOTE - To remove the O-ring, insert a screwdriver into the
openings on the retaining pin side.
- Follow the disassembly instructions in the reverse order
to assemble, after lubricating the O-rings.
(3) Fuel pump
- Take note of the position of the supply cables on the
support
pos 1 = positive (red)
pos 4 = negative (black)
NOTE - The pump connection are not interchangeable.
- Disconnect the supply cables.
- Cut the delivery hose clamp on the support.
- Remove the pump fixing washer.
All manuals and user guides at all-guides.com
76 12/04
F. 45
F. 46
F. 47
F. 48
B