Malaguti SPIDER MAX GT 500 Manual Diagnóstico página 212

SPIDER MAX 500
Connect the testing wiring only to the system
connector.
Do not connect to the central unit.
Disconnect the connection across the rpm/speed
sensor and the system.
Measure the sensor resistance by connecting the
multimeter across the + and – terminals.
Rpm/speed sensor resistance = 680 Ω Ω Ω Ω Ω ± 15%.
Make sure that the pole and shielding are insulated
from the ground. S - + = infinitive (>1MΩ).
F. 62
All manuals and user guides at all-guides.com
F. 60
F. 61
86 03/05
Replace the rpm sensor.
B