Malaguti SPIDER MAX GT 500 Manual Diagnóstico página 203

SPIDER MAX 500
- Remove the hose from the filter
- Remove the pump and the ring support and pre-cleaner.
- In case the pump needs to be replaced, remove the pre-
cleaner and the ring support.
- Follow the disassembly instructions in the reverse order
to assemble the unit and use a new hose clamp for the
delivery hose and a new washer to secure the pump.
NOTE - In order to clean the pre-cleaner use some fuel
and a soft brush.
(4) Fuel filter
The fuel filter is equipped already assembled along with
the pump support.
In order to replace the support, replace the level indicator,
the pressure regulator and the pump from the old support.
Always follow the above instructions when performing the-
se interventions.
All manuals and user guides at all-guides.com
77
F. 49
F. 50
F. 51
F. 52
12/04
B