Boston Scientific Vercise DB-1110-C Manual página 44

Vercise™ DBS Physician Manual
Charging the Charger
1. Find a convenient electrical outlet, one that will not expose the Charging System
components to water or direct heat.
2. Plug in the Power Supply.
3. Connect the Power Supply to the Base Station.
4. Place the Base Station on a flat surface.
5. Finally, place the Charger in the Base Station with the power button facing up until
the indicator light turns green.
Indicator Light Status
Green
Yellow
Off
Charger Battery Service Life
The Charger battery has a typical service life of 500 charging cycles.
Charging the Stimulator
When charging the Stimulator, the patient must use the Charger with either the Charging
Collar or an Adhesive Patch to hold the Charger over the Stimulator. The Adhesive
Patches are made of non‑reactive and Latex‑free material suitable for most sensitive skin
types.
Vercise™ DBS Physician Manual
91098825-11 40 of 341
The Charger is fully charged and ready to charge the
Stimulator.
The Charger is partially charged. The Charger may still be
used, but it may not be able to fully charge the Stimulator.
To fully charge the Charger, place it in the Base Station.
The Charger is off –or– the Charger battery is empty.
If pressing the Power Button does not turn on the Charger,
place the Charger in the Base Station to charge.
Description