Eu Declaration Of Conformity (Extract) - Tractel L 500 P Serie Manual Original De Montaje Y Uso

19

EU Declaration of Conformity (Extract)

that the machine described complies with technological safety standards that were applicable to the equipment in
the EUROPEAN UNION when it was launched on the market by the manufacturer.
X 300 P, X 400 P, X 500 P, X 520 P, L 500 P, X 600 P, X 620 P, X 820 P, X 1030 P, X 2050 P
The above-mentioned machine corresponds to the model specified on the prototype testing certificate, approved by the certificate
Commissioning the machine is prohibited until the machine in which this is installed complies as a whole with the
regulations of the 2006/42/EC Directive, the corresponding national legislation for implementing the regulations in
accordance with national law and the corresponding declaration of conformity has been issued.
The valid EN 1808 standard must be applied for the SAE in which the machine is installed.
G1035.2 - 11/2014
The manufacturer hereby declares
TRACTEL Greifzug GmbH
Scheidtbachstraße 19–21 51469 Bergisch Gladbach
represented by
Dipl.-Ing. Denis Pradon
General Manager
DECLARATION OF CONFORMITY
APPLICABLE DIRECTIVES AND STANDARDS:
DESIGNATION
Rope traction hoist
APPLICATION
Transport of persons
SERIAL NUMBER
Year of manufacture
from 03.2013
ZP/C054/14
Issuer of the prototype testing certificate:
DEKRA EXAM GmbH
Dinnendahlstrasse 9
44809 Bochum
notified under No. 0158 by the Commission of the European Community
Responsible for the documentation:
Dipl.-Ing. Denis Pradon, Tel.: +49 (0) 2202 1004 0
Bergisch Gladbach, date
MODEL
numbers
Operation and Installation Manual
EN-29